DJI Mic 3 Trasmettitore (TX singolo)
SKU DMT03
- 24-month statutory warranty of conformity and official DJI warranty
- Insured shipping, free over € 1,999 (parcels up to 50 kg) · Pick-up at our premises in Brindisi
- 14-day right of withdrawal for private customers
- Technical support in our workshop
Description
One more transmitter, many more configurations
The Transmitter for DJI Mic 3 is the TX unit of the DJI Mic 3 system sold individually. It can be added to a kit you already own to record two or more voices, or it works on its own by connecting directly to OsmoAudio ecosystem devices, with no need for the receiver.
OsmoAudio compatibility without a receiver
The direct connection ensures 48 kHz and 24-bit audio with the following devices: Osmo Pocket 3, Osmo Pocket 4, Osmo Pocket 4P, Osmo Action 4, Osmo Action 5 Pro, Osmo Action 6, Osmo 360, Osmo 360 II, Osmo Nano, Osmo Mobile 7, Osmo Mobile 7P, Osmo Mobile 8 and Osmo Mobile 8P. Connecting to Osmo Mobile series products requires the first-generation multifunction module for DJI OM. The transmitter is not compatible with DJI Mic, DJI Mic 2 and DJI Mic Mini.
Up to 4 TX and 8 RX
- A DJI Mic 3 system supports up to four transmitters and eight receivers simultaneously, with four-channel output on compatible cameras and software.
- Each transmitter can connect to up to eight Mic 3 receivers; each receiver to up to four transmitters.
- A direct Bluetooth connection to a smartphone is possible, but a phone can only pair with one transmitter at a time.
Audio quality and post-production
- Adaptive gain control: automatic mode against clipping in dynamic scenes, dynamic mode for consistent volume in controlled environments.
- Three preset voice tones: normal, Rich (more present low tones) and bright for streaming and teaching.
- Two-level noise cancellation, low for quiet indoor settings and high for noisy environments.
- Internal dual-file 32-bit float recording: the original track and the version processed by the algorithm, with 32 GB of built-in storage.
- Built-in timecode embedded in the files, with a drift of less than one frame in 24 hours, for quickly syncing multi-camera setups.
Stable transmission and battery life
Automatic switching between the 2.4 GHz and 5 GHz bands keeps the connection stable up to 400 m in open areas without interference, with audio transmission without loss of quality. The transmitter offers up to 8 hours of battery life and charges via the included dedicated magnetic cable. The body integrates a magnet for magnetic or clip mounting, and is lightened to about 16 g with the magnet.
In the box
| Qty | Item |
|---|---|
| 1 | Transmitter for DJI Mic 3 |
| 1 | Magnetic charging cable for DJI Mic 3 transmitter |
| 1 | Windscreen for DJI Mic 3 (black/grey) |
| 1 | Windscreen for DJI Mic 3 (black) |
| 1 | Magnet for DJI Mic 3 |
| 1 | Magnetic clip for DJI Mic 3 |
| 1 | Compact carrying case for DJI Mic 3 |
Contents verified against the manufacturer's official datasheet.
Technical data
| Model | DMT03 |
|---|---|
| Type | Single transmitter (TX) for DJI Mic 3 |
| Weight | Approx. 16 g (with magnet) |
| Dimensions | 28.77 × 28.34 × 16.35 mm (magnet included) |
| Microphone | Omnidirectional |
| Sensitivity | −36 ±1 dBV at 1 kHz, 94 dB SPL |
| Maximum SPL | 126 dB SPL @1% THD; 130 dB SPL @10% THD |
| Audio transmission | 48 kHz / 24-bit, Lossless Audio mode |
| Internal recording | 24-bit or 32-bit float, dual file (original + processed) |
| Internal storage | 32 GB, no external memory support |
| Timecode | Accuracy 0.5 ppm, drift of less than 1 frame in 24 hours |
| Transmission bands | 2.4 GHz and 5 GHz with automatic frequency hopping |
| Range | Up to 400 m in open areas without interference (Lossless Audio off); 80 m in a high-interference lab environment |
| Bluetooth | BLE <10 dBm, BR/EDR <20 dBm |
| Battery | Li-ion 137 mAh, 0.531 Wh, 3.87 V |
| Flight time | Up to 8 hours |
| Charging | Dedicated magnetic charging cable (max voltage 5 V) |
| Connection capacity | Up to 8 DJI Mic 3 receivers per transmitter; system supports up to 4 TX + 8 RX |
| OsmoAudio compatibility | Osmo Pocket 3/4/4P, Osmo Action 4, Action 5 Pro, Action 6, Osmo 360, Osmo 360 II, Osmo Nano, Osmo Mobile 7/7P/8/8P |
| App | DJI Mimo (iOS and Android) |
| Audio processing | Adaptive gain, 3 voice tone presets, 2-level noise cancellation |
Frequently asked questions
Can I use the transmitter without the receiver?
Yes. The transmitter connects directly to devices in the OsmoAudio ecosystem (for example Osmo Pocket 3, Osmo Action 5 Pro, Osmo 360, Osmo Nano) with 48 kHz/24-bit audio, without needing the receiver. For Osmo Mobile series products, the first-generation Multifunction Module for DJI OM is required.
Is it compatible with DJI Mic 2 or DJI Mic Mini?
No. The DJI Mic 3 transmitter works only within the DJI Mic 3 system and with compatible OsmoAudio devices: it is not compatible with DJI Mic, DJI Mic 2 and DJI Mic Mini.
How many transmitters can I use together?
The DJI Mic 3 system supports up to four transmitters and eight receivers at the same time, with recording of up to four separate tracks on compatible cameras and software.
Does it also record internally?
Yes. It has 32 GB of internal memory and records dual files in 32-bit float, saving both the original track and the version processed by the algorithm. Files include timecode.
Is the charging case included in the box?
No. The charging case is not included in this version and must be purchased separately; the transmitter charges with the supplied magnetic cable.
Legal guarantee
As a consumer you are entitled by law to the legal guarantee of conformity for at least 2 years from delivery, for any defect present at the time of delivery (Italian Consumer Code, arts. 128 et seq.). The seller is directly liable for it. Any commercial warranties from the manufacturer are in addition to, and do not limit, the legal guarantee. Details and how to claim it.
You might also like
Have questions about this product?
Ask the people who use and repair it every day. We usually reply within one business day.