DJI
Propellers for DJI Avata 360
Set of original DJI replacement propellers for the Avata 360 FPV drone. The package contains two pairs of propellers (four in total, enough for all motors) and eight M2×4.8 mm screws. Ideal for replacing worn or damaged blades and getting back to flying safely.
- 24-month statutory warranty of conformity and official DJI warranty
- Insured shipping, free over € 1,999 (parcels up to 50 kg) · Pick-up at our premises in Brindisi
- 14-day right of withdrawal for private customers
- Technical support in our workshop
Description
Original propellers for DJI Avata 360
The Propellers for DJI Avata 360 are the official DJI spare part for the Avata 360 FPV drone. They deliver efficient, stable propulsion while maintaining the flight behaviour intended by the manufacturer. The package includes two pairs of propellers (four pieces, so a complete set for the four motors) and eight M2×4.8 mm screws to use during installation.
Main features
- Model 3340S, diameter of approx. 83.1 mm
- Light weight: approx. 3.5 g per propeller
- Clockwise (CW) and counterclockwise (CCW) propellers for adjacent motors
- M2×4.8 mm fixing screws included
- Dedicated compatibility: DJI Avata 360
How to install them
On adjacent motors the propellers spin clockwise (CW) and counterclockwise (CCW): fit the marked propeller on the marked motor and the unmarked propeller on the unmarked motor. When replacing the propellers you must also replace the screws, using the ones supplied in the package and tightening them firmly.
DJI recommends using the screwdriver supplied with the drone for installation and removal: a screwdriver of the wrong size can strip the propeller screws or make them impossible to remove.
When to replace the propellers
Propellers are wear components. After an impact, a hard landing or contact with branches and obstacles, always check the blades: if they are chipped, deformed or cracked, they must be replaced as soon as possible. Flying with damaged propellers means vibrations, loss of stability and higher battery consumption. Keeping a spare set in your backpack is the simplest way to avoid interrupting a flight session.
Check compatibility
The propellers of the Avata 360 (model 3340S, 83.1 mm, 4.8 mm screws) are not interchangeable with those of DJI Avata 2 (3032S, 75.66 mm, M2×8.7 mm screws) or with those of DJI Neo (2016S, 50.8 mm). Always check the model before purchasing.
Original DJI product, available at AerialClick, DJI reseller and service centre in Brindisi.
In the box
| Qty | Item |
|---|---|
| 2 | Propellers for DJI Avata 360 (pair) |
| 8 | M2×4.8 mm screw |
Contents verified against the manufacturer's official datasheet.
Technical data
| Model | 3340S |
|---|---|
| Diameter | Approx. 83.1 mm |
| Weight (per propeller) | Approx. 3.5 g |
| Screws included | M2×4.8 mm (8 pieces) |
| Quantity | 2 pairs (4 propellers) |
| Direction of rotation | CW and CCW (marked and unmarked propellers) |
| Compatibility | DJI Avata 360 |
Frequently asked questions
How many propellers are in the package?
The package includes two pairs of propellers, i.e. four pieces in total: a complete set for the four motors of the DJI Avata 360. Eight M2×4.8 mm screws are also included.
Are they compatible with DJI Avata 2 or DJI Neo?
No. DJI lists these propellers as compatible with the DJI Avata 360 only. The model (3340S), diameter (83.1 mm) and screws (M2×4.8 mm) differ from those of Avata 2 (3032S, 75.66 mm, M2×8.7 mm screws) and Neo (2016S, 50.8 mm).
Do I also need to replace the screws when I replace the propellers?
Yes. DJI states that the screws should be replaced together with the propellers, using the ones supplied in the package and tightening them firmly.
How do I know which position each propeller goes in?
The propellers on adjacent motors spin one clockwise (CW) and one counterclockwise (CCW). The marked propeller goes on the marked motor, the unmarked one on the unmarked motor.
Is the screwdriver included?
In the package contents DJI lists only the propellers and screws. DJI recommends using the screwdriver supplied with the drone, because a tool of the wrong size can strip the screws or make them impossible to remove.
Legal guarantee
As a consumer you are entitled by law to the legal guarantee of conformity for at least 2 years from delivery, for any defect present at the time of delivery (Italian Consumer Code, arts. 128 et seq.). The seller is directly liable for it. Any commercial warranties from the manufacturer are in addition to, and do not limit, the legal guarantee. Details and how to claim it.
You might also like
Have questions about this product?
Ask the people who use and repair it every day. We usually reply within one business day.
€ 9,00